Thanks Adam!
Very easy update and seems to be running very smoothly. Woohoo!!!
1 Like
Same here. Very easy and painless update. Thank you for all of your efforts getting it out!
1 Like
Are there any plans to have this update on our phones automatically? Or we still to wait for long
What is still pending??
El El vie, 4 jun 2021 a las 22:34, Sharad via Teracube Community <community@myteracube.com> escribió:
From my understanding it should be soon. They are making a last min fix for a signal issue. They had said pushing out I think this week over the air but maybe a touch longer to ensure proper connection. But it will be coming. I am testing the latest release it was discovered on. Other wise the release feels pretty great.
Hope that helps.
uh oh. I was at dinner and my phone was acting weird. I was in an app that required location and it wouldn’t pick up my location. Tried closing an relaunching the app a few times and still wouldn’t recognize my location so I decided to restart the phone. I got the teracube logo and was asked to put in my pattern password, after that, black. No response. My phone is dead. Tried powering on and nothing. Tried plugging in and powering on and nothing. Left on charger for a bit and powering on, nothing. When plugged in, led indicator is red. Nothing is working. Any suggestions to get be back up an running? @Sharad probably have a warranty claim coming in fyi, would appreciate an expedition, obviously willing to do the deposit.
Found instructions for recovery mode. [ Troubleshooting ] Recovery Mode
I was able to get the phone to come on with the “reboot system now” option. I am going to test a few things out, will provide an update a little later today after I have some time to observe how the phone is working.
6/28 UPDATE: My phone was showing as 3% once it came to life this morning after the recovery mode boot up. This is weird because when my phone went dead on Friday I remember having roughly ~80% battery, maybe it drained over the weekend sitting idle. Not sure it means anything but I thought it was worth a note.
I got it charged up and input my SIM card in. I did a restart just to get a clean slate with the SIM in and all went well. I then did a shutdown so that I could boot up in recovery mode again and do a wipe of my partition cache because I remember a couple of years ago on my Pixel with having issues after going from one version of Android to another and I found there was a recommendation that after major updates that a partition cache wipe was a good idea to avoid issues. While trying to get into recovery mode again I accidentally just did a regular boot and the phone began it’s normal start up procedures. I got the teracube logo, the pattern unlock request, the teracube logo again then a black screen again with no response. Additionally the phone was plugged in while doing this boot so I got the red LED light again. I tried doing a normal power on again and it wouldn’t boot up. So I did a recovery mode start up and was able to get in like I did earlier this morning (note I did the partition cache wipe at this point) and this time the battery showed 90%. Maybe the wipe will do the trick to keep it from happening again. Anyways it appears this issue I am having is only occurring during boot. I don’t restart my phone often so probably something I can live with for now.
I will be keeping an extra eye on performance and anything weird, more to come.
6/29: UPDATE: Nothing else to report really. Everything seems to be working normally. I haven’t attempted a restart again, might try that today.
7/1 UPDATE: Had to do a restart today after unbearable connectivity on cell network. Same thing, end in a black screen only to be powered on in recovery mode. Absolutely 100% wild to me that no one else has commented. Anyone else having this issue? Teracube trying to reproduce? Something isn’t right with my phone.
Ok the do not disturb isn’t working right. The contacts that I have allowed to bypass the do not disturb. Well no ringing from phone or tone from sms.
2 Likes
ok - raising this for the team. Will get back on this.
2 Likes
I am having an issue with Smart Lock. The trusted places I set stay active for about 24 hours, then they become inactive. I need to go into settings and retoggle the set location, then it will work again for about a day. Any one else having this type of issue?
1 Like
Are there any plans to have this update on our phones automatically? Or we still to wait for long
El El sáb, 12 jun 2021 a las 14:37, flyfree via Teracube Community <community@myteracube.com> escribió:
1 Like
I think they are just trying to smooth out a few minor kinks? Those like myself that downloaded and installed are the testers and reporting any issues to try and make sure it’s as perfect as possible for everyone else. I suspect it will be fairly soon.
1 Like
I tried this out - seems to be working fine at my place. Are you still having this issue?
Things I’ve noticed since updating:
-
Sometimes I won’t get notifications from apps like Signal unless I open the app. I’ve disabled battery optimization on the app but still run into this
-
Some apps won’t work, will freeze up, and then force quit or I’ll have to restart my device but that could be an app issue (maybe the Oregon air app isn’t developed well for Android 10 haha)
-
Wifi or cell signal can be finicky outside of my home, maybe that’s a signal strength issue outside of the phone. Can’t remember it in the 9 version but it could just be that switching from wifi to cellular service is slower on 10 than 9 or i had a setting toggled that was reset
Not sure if you have tried this?
Do you have the 10.0.0 build or 10.0.1 which fixed cellular signal issue over 10.0.0?
Hi Sharad,
I have been playing with mine to try and narrow down my DND no notification for people. I have the latest update. I have narrowed down some of my notification issues to custom ringtones, especially phone calls when dnd is on. Eg my wife’s howl ringtone works for text but not phone calls. Not sure if this is the same issue but wondering if they maybe related?
1 Like
Not sure on that. How have you set custom ringtones? Is it possible to revert to simple ringtone setup and try again?
1 Like
Hi Sharad,
Will double check the phone calls but I think I did get it to work with the stock ring tones. Sorry so much going on and I didn’t write down as I normally do. Will redo the testing tonight. With steps used to add it.
Dylan
1 Like